PA, PBT AND PET AUTOMOTIVE COMPOUNDS
The mobility and transport sector has always been a leader in innovation for mechanical developments and process performance improvements. Thanks to our engineering polymers range, NUREL is part of this continuous development race with our offer in PA6, PA66, PBT and PET.
In recent years, the way we travel has changed, and with it, the materials that enable mobility.. Within these materials, engineering polymers have to be adapted to meet new standards and requirements to meet new automotive challenges.
With an eye on the new mobility, our product offering is focused on helping manufacturers achieve highly demanded objectives in the sector, such as: fuel consumption reduction, emissions reduction and dynamic performance, as well as to reduce costs in manufacturing processes.
NUREL supports the automotive and transportation industry in general by developing a more sustainable materials offer, with the aim of reducing dependence on fossil materials, promoting circularity and reducing CO2 emissions.
Materials adapted to future vehicle design
NUREL offers PA, PBT and PET based engineering polymers to suit the technical requirements of the automotive industry, featuring hydrolysis resistant grades, conductive and reinforced polyamides for metal substitution, and weight reduction.
Our grades are designed to provide excellent dimensional stability, reduce cycle times and production costs, thanks to our High Flow range of high fluidity products.
One of the fundamental aspects in vehicle design are the finishes, as they determine the user experience and the perceived quality of the materials. NUREL provides diverse solutions for the interior and exterior finishing of vehicles, which achieve an excellent surface finish, both in reinforced and non-reinforced grades.
FASTER, LIGHTER, GREENER, AND BETTER
Mobility and transportation industry is evolving towards a more sustainable model. The implementation and proliferation of electric vehicles in our daily lives is a reality, as they favor the reduction of emissions and dependence on fossil fuels. In addition, the new “mobility” requires more circular models, involving waste reduction and encouraging the use of recycled and recyclable materials. Thus, one of the industry’s challenges for 2023 is to reach 30% recycled content in its vehicles.
PA and PBT-based engineered compounds are a solution to the need to replace conventional materials with lighter ones, while maintaining the same technical performance.
Recycled PA6 and PA66 compounds
In order to meet the requirements of the automotive industry in terms of sustainability and eco-design, NUREL is expanding and optimizing its compounding, re-grinding and recycling production lines to offer a new range of engineered compounds based on recycled polyamides: Recomyde®.
FASTER, LIGHTER, GREENER, AND BETTER
Mobility and transportation industry is evolving towards a more sustainable model. The implementation and proliferation of electric vehicles in our daily lives is a reality, as they favor the reduction of emissions and dependence on fossil fuels. In addition, the new “mobility” requires more circular models, involving waste reduction and encouraging the use of recycled and recyclable materials. Thus, one of the industry’s challenges for 2023 is to reach 30% recycled content in its vehicles.
PA and PBT-based engineered compounds are a solution to the need to replace conventional materials with lighter ones, while maintaining the same technical performance.
Recycled PA6 and PA66 compounds
In order to meet the requirements of the automotive industry in terms of sustainability and eco-design, NUREL is expanding and optimizing its compounding, re-grinding and recycling production lines to offer a new range of engineered compounds based on recycled polyamides: Recomyde®.
Our range of mobility and automotive engineering polymers
PA6 and PA66
PBT, PET, PBT/PET and PBT blends
Recycled PA6 and PA66
PP Compounds
Download our catalogues
Electric Vehicle
Solutions
Flame Retardant
Flame resistant grades that meet the most demanding requirements, from V2 to V0 in UL94 and a GWFI of up to 960º. Halogen-free solutions and EN45545 grades available.
Reinforced solutions
Our mineral filler, glass fiber and steel fiber reinforced solutions achieve the best performance for injection molding and extrusion applications.
High flow
High Flow polyamide grades provides high mechanical performance and increased production capacity. Recommended for complex geometries and improvement of the surface finish of components.
Hydrolysis resistant
NUREL offers polyamide 6 and PBT grades, designed to provide resistance to moisture, coolants, fuels, oil and chemical corrosion, concentrated environmental exposures and high temperatures.
Thermal stabilization
PA grades with excellent long-term thermal stabilization up to 180ºC are available. Thanks to our innovative technology, we offer highly thermally stabilized grades free of metallic and halogenated compounds.
Weight reduction
We have a wide range of compounds up to 20% lighter thanks to solutions reinforced with glass fibers and beads, mineral reinforcements and nanoclays.
High Viscosity
NUREL offers high viscosity grades in both polyamide for extrusion blow molding and extrusion processes and PBT for extrusion, pipe, cable and profile applications.
Thermal conductivity
Promyde® has a new range of PA6 with added thermally conductive properties to provide solutions for new applications where heat dissipation is sought.
Electrical conductivity
We offer PA6 compounds with a wide range of electrical conductivities, from anti-static grades to materials with high conductivity grades (from 10 to 1012 Ohm).
Láser Welding
These new polyamides have been modified to achieve a direct laser transmittance 4 times higher than the standard, while maintaining their mechanical properties unchanged.
Surface Finish
Promyde® offers a range of products specifically developed for optimum surface finish compared to regular glass fiber reinforced grades.
Orange RAL 2003
For high voltage applications in electric car manufacturing, our pigment formulation remains unalterable over time and at high temperatures. Available in halogen-free flame retardant grades.
Applications
Electric Vehicle
We have been working for years on the development of specific engineering polymers for electric vehicles, providing solutions to new challenges, such as improving their autonomy, safety and sustainability.
Underhood Applications
The Promyde range of materials provides solutions for all types of underhood applications requiring high temperature stability and hydrolysis resistance, while maintaining their mechanical properties.
Structural reinforced parts
Vehicle structures, such as handgrips, require specific high flow and surface finish solutions that allow temperature dissipation for proper operation.
Train interior
NUREL offers specialized PA, PBT, PET, and PBT/PET compounds for train component solutions, including connections and cables. These compounds are UL94 certified and compliant with HL3 according to the EN45545 standard.
Tanks and reservoirs
Promyde PA6 grades for blow molding, with a viscosity of 5.0, provide improved mechanical properties and increased resistance to flow in the molten state.
Vehicle exterior and headlights
Vehicle exteriors require unique solutions, such as UV resistance and surface finish. NUREL's polyamide compounds offer unique performance in terms of strength and durability, remaining unalterable for a longer period of time.
Front-end modules
For vehicle front-end parts, Promyde's polyamide composites can reduce clamping force by 30%, improving the properties of the manufactured applications, reducing production costs.
Sensors and radar devices
With new mobility, autonomous driving is getting closer and closer to becoming a reality. From NUREL, we offer PA, PBT, PET and PBT/PET compounds with electromagnetic shielding solutions.
RELATED MARKETS
Want to stay updated on the latest on NUREL Technical Polymers?
Subscribe to the Newsletter
